We ship to ANY country worldwide!   Contact Customer service by Skype: sotvoritel or Email: admin@ecominded.net
Welcome visitor you can log in or create an account
A+ A A-


How to make a handle for ploskorez

Скачать шаблоны для cms Joomla 3 бесплатно.
Зелёные шаблоны джумла.
  • Written by Yury Smirnov
  • Hits: 2594
  • Print, Email

User Rating: 0 / 5

Star InactiveStar InactiveStar InactiveStar InactiveStar Inactive
 
Ploskorez - universal no-till gardening tool from Russia.

The oversized length of a handle makes delivery cost so high that we counted for the best to offer you 2 options:
1. Make a handle yourself or with the help of a friend or a handyman - please check detailed step-by-step instructions below.
2. Order a handle at ecominded shop - for some extra delivery cost - http://ecominded.net/heirloom-seeds/garden-tools/handle-for-ploskorez-detail.html

To make a handle for ploskorez Fokina you will need a wooden plank (pine wood is fine) with the following dimensions:

Length: 130 - 140 cm, Width: 3.0 - 4.5 cm, Thickness: 1.8-2.0 cm.
You will also need a planer, a drill with an 8 mm drill bit and a sandpaper.


1. Use a planer to cut the edges of the plank. Make sure you set the minimum cutting edge of the planer nife.
IMPORTANT: Leave about 20-25 cm at end of the plank unplaned - you will need it later to mark the holes.


2. Marking the holes. Take a ruler and a pencil.
You need to draw 2 parallel lines along the axis of the plank at equal distances from the edges. The distance between the lines should be 4 - 5 mm.
For example if you have a 4 cm width plank - measure 18 mm from each edge and you get 4 mm distance between the marks (and the lines).


3. Drilling the holes and adjusting ploskorez.
Appose ploskorez to the plank the way it is shown on the picture.
Align the holes on the ploskorez with the lines as it is shown on the picture and mark the holes with a pencil.
Drill the lower hole, put the ploskorez on, insert the bolt and tighten the nut.
Align the upper hole of the ploskorez with the two lines and drill the second hole in the plank right through the ploskorez hole.
Tighten the second bolt and nut.

   
4. Sanding with sandpaper to make the handle smooth and comfortable.


All done! More info about ploskorez Fokina herePlace an order here!